MT6582__Vsun__Capture__Capture__5.0__ALPS.L0.MP2.V1_VSUN6582.WT.L_P10

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 33 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6582

BB_CPU_NME : [MediaTek] MT6582_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x87

NAND Flash : NOT INSTALLED

eMMC Flash : 110100303038474530015171B139C19D

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x11 , OEM : 0100

[eMMC] : FLASH_INF : [TOSHIBA] , 0EG80

[eMMC] : FLASH_CID : 110100303038474530015171B139C19D

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000001D2000000

[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]

DEV RID    : 0xF662AC7B5D4C1F7F70CFF3B960861BCD

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand     : Vsun

ProdName  : Capture

ProdModel : Capture

Device    : Capture

AndroidVer: 5.0

MTKxCPU   : MT6582

MTKxPRJ   : ALPS.L0.MP2.V1_VSUN6582.WT.L_P10

[Read Ok] : preloader_vsun6582_wt_l.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : EBR2

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / vsun6582_wt_l / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 2084 MiB

Scatter saved to : C:\Users\YASIR GSM\CM2 BKUP\MT6582__Vsun__Capture__Capture__5.0__ALPS.L0.MP2.V1_VSUN6582.WT.L_P10\

All done!

Done!

Elapsed: 00:08:09

Reconnect Power/Cable!

http://destyy.com/wKNlDl

MT6580__Lava__iris50__iris820__6.0__alps-mp-m0.mp1-V2.34_lava6580.weg.m_P30

http://gsul.me/cf6W

MSM8916__LENOVO__Lenovo__ANDR_v5.1.1__Lenovo_A6020a46__A6020a46__A6020a46

MSM8916__LENOVO__Lenovo__ANDR_v5.1.1__Lenovo_A6020a46__A6020a46__A6020a46

http://gsul.me/c6ZW

T13_BOPAI_BOE_BATTERY_64_4_t13_bopai_S014_mione_boe_battery_64_4_5.1_mione_XP_battery-R1_Android_6.0_V01_20171014_R1

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable

 ====  Wait for phone...

Phone found! [ 26 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 26 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ... 

Phone found! [ 26 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : t13_bopai_S014_mione_boe_battery_64_4_dt

Model Brand : mione

Model Device: t13_bopai_S014_mione_boe_battery_64_4

AndrVersion : 5.1

BaseBand CPU: T13_BOPAI_BOE_BATTERY_64_4

Project Ver : mione_XP_battery-R1_Android_6.0_V01_20171014

Model Ext   : R1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.07.3_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : thirdlogo.bin

[Read Ok] : forthlogo.bin

[Read Ok] : fifthlogo.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : oem.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 2326 MiB

Saved to : C:\Users\YASIR GSM\CM2 BAKUP\NEW\T13_BOPAI_BOE_BATTERY_64_4_t13_bopai_S014_mione_boe_battery_64_4_5.1_mione_XP_battery-R1_Android_6.0_V01_20171014_R1\

Done!

Elapsed: 00:09:04

Reconnect Power/Cable!

http://corneey.com/wJ7Pco

SP7731CEB_G1_6.0_G-Touch-G1_Android_6.0_V01_20171219_G1

SP7731CEB_G1_6.0_G-Touch-G1_Android_6.0_V01_20171219_G1

                                                                                 

http://corneey.com/wJ7Y0e

SP7731CEA_MITO-A880_6.0_MITO_A880_06122017_V08_MITO_A880

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable

 ====  Wait for phone...

Phone found! [ 26 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 26 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ... 

Phone found! [ 26 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : MITO A880

Model Brand : MITO

Model Device: MITO-A880

AndrVersion : 6.0

BaseBand CPU: SP7731CEA

Project Ver : MITO_A880_06122017_V08

Model Ext   : MITO A880

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_540x960.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1877 MiB

Saved to : C:\Users\YASIR GSM\CM2 BAKUP\NEW\SP7731CEA_MITO-A880_6.0_MITO_A880_06122017_V08_MITO_A880\

Done!

Elapsed: 00:06:58

Reconnect Power/Cable!

http://corneey.com/wJ7nEe

MT6752__Lenovo__Lenovo_A7000-a__A7000plus__5.0__A7000-a_PLUS_USR_S150_1510142201_MP6.V3_LENOVO6752_ROW

                                                                                       

                                                                         

http://zipansion.com/27cgb